1969 Ford Falcon GT-HO Phase I Specifications
|
1969 Ford Falcon GT-HO Phase I Specifications - Specs
engine Windsor 351 V8 position Front, Longitudinal aspiration Natural valvetrain Pushrod OHV fuel feed Holley 600CFM 4-Barrel Downdraught Carburettor displacement 5752 cc / 351 cu in bore 102 mm / 4.02 in stroke 89 mm / 3.5 in compression 11.0:1 power 223.7 kw / 300 bhp @ 5400 rpm hp per litre 52.16 bhp per litre bhp/weight 200.0 bhp per weight torque 515.21 nm / 380 ft lbs @ 3400 rpm drive wheels RWD w/LSD front brakes Vented Discs w/Servo Assist f brake size 286 mm / 11.3 in rear brakes Drums w/Servo Assist r brake size 254 mm / 10.0 in front wheels F 35.6 x 15.2 cm / 14 x 6.0 in rear wheels R 35.6 x 15.2 cm / 14 x 6 in front tire size ER70H14 radials rear tire size ER70H14 radials steering Recirculating Ball w/Power Assist f suspension Wishbones w/Spring over Strut-Type Dampers, Anti Roll Bar r suspension Live Axle w/Semi-Elliptic Springs, Telescopic Shock Absorbers, Anti-Roll Bar weight 1500 kg / 3307 lbs wheelbase 2819 mm / 111.0 in front track 1496 mm / 58.9 in rear track 1486 mm / 58.5 in length 4689 mm / 184.6 in width 1869 mm / 73.6 in height 1397 mm / 55.0 in transmission 4-Speed Close-Ratio Manual gear ratios 2.32:1, 1.69:1, 1.29:1, 1.00:1 final drive 3.00:1 production 251
|
Print this Page
E-mail to a friend
Add this page to your favourites
Link to this article : http://auto-specs.zercustoms.com/f/ford/1969-ford-falcon-gt-ho-phase-i-specifications.html
Rating:
Not yet rated
Comments
No comments posted.
Add Comment
Please use our Facebook page for comments.